Quote:
|
Originally Posted by TREX
I Know For A Fact This Stuff Works But Am Thinking It Aint Doin The Engine Allot Of Good, It Runs Fine No Drama's But I Am Only Adding A Bit Of Engine Oil To Degrade The Fuel And Put A Bit Of Lubricant Through The Engine. I Just Would Like To Know What Sort Of Ratio's I "should" Be Using
|
Land Rover's 'Expedition Guide' says that diesel engines can be run on kerosene, Jet-A or old low-sulphur diesel if you add a couple of tablespoons of clean engine oil for every 50 litres (which I think is about 13 US Gallons).
I wouldn't like to try this in a common-rail diesel like the Td5 or TdV6 though.
