First things first. If you haven't already, get yourself an original owners manual. They show up on the "bay" from time to time bot used and new. Also try
www.roversland.com as they also have acouple for sale too. If not, try
www.books4cars.com as they almost always have them brand new.
For the turn signal: Open the hood, pop the cover on top of the headlight assembly. You will see three plastic tabs with metal adjusting that secure the headlight unit in place. You will turn the tabs either clockwise or counterclockwise(don't remember well) in order to line up the tabs with the slits in the metal panel they are attached to. Once you do this on all three tabs, you might be able to pull the assembly from the front. The turn signal should be easily acccesible now.
P.S. Be careful when mounting the tabs back, as they are made from plastic and if you break one of them your light will go out of adjustment.
Hope this helps.
Carlos
Quote:
|
Originally Posted by Jharv
Hello all- great forum! Clearly a newbie and a newbie who likes to tinker with his 2001 Discovery II w/out having any particular expertise...which leads me to my question....
I'm trying to replace my front driver's side turn signal (which is out and, oddly, filled with water)....but cannot figure out how! It looks like I probably have to take the headlight out in order to get to the turn signal...something I was hoping to avoid, but I can't be sure. Thoughts? I can't find anything online helping me out....
Thanks!
|
