Quote:
|
Originally Posted by nwemerys
Good morning,
I hope it's OK to ask a few questions re your Hella lamp install. I'm rather an idiot when it comes to mechanical and electrical work.
I purchased (used) a set of Hellas. Not sure of the model but they are 8.75 inches in diameter and have a black metal casing. I also purchased a wiring harness that, if installed properly, will allow the laps to illuminate every other time the fog lights are engaged. The Hellas are meant to be fastened to the bumper or light bar, but since I'm intalling a factory poly "A" bar, they will "hang" from the cross member of the A bar.
My questions are:
How do I remove the bumper to install the A bar?
Should I wire the lamps into the fuse box, existing fog lamps, or directly into the battery?
Thanks in advance,
Dave
|
My front bumper is trimmed, so removal of the bumper was very easy. All the bolts holding the bumber to the frame are accessible.
I think you first have to remove the fender lining as well as the plastic lining under the bumper, then you can access the bolts holding the bumper to the frame.
