Make sure you check to make sure that the cylinders are cast iron, not aluminum if you are planning on honing them.... (a magnet will tell you which is which if there is a question..) you cannont use a brake hone on the aluminum ones... (although if they are not in too bad of shape, a scotch bright pad and some very, very fine emery cloth has been used, but only for a quick fix to get you home...).
__________________
Andrew Barr.
1972 Series III 109.
"the Tin Turtle"
"However, that was his ploy and I caved....totally caved...   LOL!" Jellijo 
|
