Help Plugs & Packs (Went wrong somewhere)
Took out the secondary air pipes in the '04 to switch out the wires. Just over 54k decided I'd been putting it off swaping in the 8mm magnecors. Went wrong some where. Put everything back together and the idle is way high. SES is flashing. I suspected I might have crossed the wires. I had to take two out just to put the last ones in so swapping out wire for wire went down the tubes. Does anyone have a diagram that shows what plug goes to where on the coil pack.
__________________
'04 Discovery SE7. Last of the best.
|