Hi Gordo,
Many thanks!
I'm an old fart (56) and retired so although I built it in my driveway in the heat and cold I had lots of time to work.
I'd like to see your progress as soon as you are willing to share a few photos.
I'm posting two more below.
Paul
This is one of the bulkhead outriggers welded on with the plate on the back side because it had to be higher than the frame. It was during the bulkhead rebuild but before the center portion was cut many times for the engine, before painting. It also shows the heater before it was shortened.
This one shows the center floor area with the brake valve, shifter, hi/low shifter, center dif lock shifter, e-brake that needs work to be pretty, the RR gas pedal, and the shortened heater box.
