Quote:
|
Originally Posted by Cris_RRC
Hi guys yerterday we where doing some work on my RRC drivers door just trying to adjust the inner rod that opens the door ,before it will open but I had to pull very hard ,so we screw the rod all the way and the door open with a lot lighter touch , problem is that a few hours later I lock the door came back and now it will not open from the outside or inside ,so I have to climb thru the passenger door into the drivers seat for now ....so what went wrong and how the hell do I open this now that is close  ..?? Thanks |
I just went through this very thing with my '92. What I had to do to get the door open was remove the drivers seat via the back seat and carefully remove the door panel from the inside (complete pain in the @ss as I had to do it 3 times). What happened on mine was the rod was twisting at the interior door handle and the springs on the latch were not strong enough to retract it back. I cleaned and re-lubed to no avail. I eventually just replaced the latch and it works like a champ now. The latch is a GM unit.
