Quote:
|
Originally Posted by Capt. Ron
OK, several more years of life for what...$1200-1500?
Cam options have been mentioned, Crower 258 or 260, w/kit
Three angle valve job
New ARP head studs, as opposed to new head bolts
New valve cover bolts
Torque wrench-to what N-m/ lb-ft should I get?
Head gaskets
anything else?
|
Not sure on the price difference between the ARP head studs and the head bolts, but I didn't have a single problem using the head bolts I got from AB
I would recommend the following kit from AB includes just about everything you need for the head gasket job(I am sure you can the same from any parts place as well) it has all the gaskets you'll need, plus valve seals. I would also change out the thermostat while in there and of course new plugs/wires. I forgot the exact torque specs, but if you have the shop manual they are listed in there.
http://www.roverparts.com/Parts/STC4082.cfm
