cutnfell,
Well, firstoff, what is your battery voltage at rest? It should be about 12.7 volts.
Are teeth missing on the starter gear? On the flywheel? Missing teeth mean that there's nothing to grab on to...
Since the solenoid is clicking, you should be good up to that point, make sure the starter ground is clean and tight and that the cable is good. If you're daring, you should be able to apply 12v to the starter out of the truck to see if it actuates, but I didn't tell you to do that...
Bogatyr
__________________
Current Rover Fleet:
1996 D1 120k (finally on the road)
1970 IIa 88" (the running one)
1970 IIa 88" (parts truck - need any parts?)
1966 IIa 109" (next project...)
|
