Difference between Series I & II chassis
I'm new to the Land Rover world and have recently bought myself an 88in Series I. It came with a full MOT but don't think the chassis will get through next year's MOT and have been looking for a replacement chassis, but to no avail.
I have acquired a used Series II chassis that is in excellent condition and was wondering if they can be fitted to a Series I without too many modifications.
I am aware holes will need drilled and shafts welded into place for the brake and clutch pedals, and also a hole drilled in the cross member for the brake master cylinder.
I am also aware the track is slightly wider on the Series II but I am assuiming this is due to mods on the axles and not the chassis. I haven't measured the chassis to see if it is dimensionally the same as the Series I and was hoping someone would know if they are interchangeable.
Can anyone help?
Thanks
Steve
|
