I was bleeding it per the rave CD at first. Then I went thru and bleed pump, accumulater, valves at the top of the booster and then went and tried to bleed the whole system still no luck. The rave CD and the manual do not even cover the bleeding the rear brakes. Unless I am missing some sections on both.
I had to replace my ABS pump thats how all this started. Last time I was in there working on the brake system I installed the ABS pump I rebuilt and noticed that there were little peices of black hose from the line that was feeding the pump. I pushed out all the fluid at the lines but again could not get anything out of the rear lines and there was no fluid in them. Is it possible to clean out the booster? The peices of broken down hose were very very small about the size of a pin head and smaller.
|
