I don't think you'll have any problems...The "footplate" of the winch mounts against the front of the bumper, think of it as pushing your winch over backwards 90 deg. There's quiet abit of room behind the mounting plate. You will then undo the gearbox and rotate it back 90 deg so that you can reach the free pool handle, same with the motor for the connections... I didn't bother with either as the cables I fitted still reached the terminals plus I can't be arsed to free spool line out- that's why they have an out button on the remote.
Just don't bother fitting the bumpette's, I still need to post a picture of how they are produced but basically they are a bolt with a nail spot welded to it and molded into the rubber. Sneeze and the whole frigging ruber thing ends up on the drive way.
__________________
D2 with stuff added
|
