Yeah I took around 10.5 inches out of the middle of the chassis (between the trailing and radius arms) which made it about 89 inch wheelbase. With the 90 flares I had a little wiggle room and I wanted to push the rear tire back, compared to a stock series. The rails are the same width so once you shorten the frame and cut the old outriggers off, you can use series bulkhead outriggers and a rear crossmember to make it all fit together. Im not trying to make it sound easy, as it is time consuming but with some patience, alot of measuring and studying, and a decent tools/fab skills, it isnt too bad.
|
