Why Can't I Keep No Friggin Brakes???
I replaced the bearings, stub axle assembly, and all the misc. nuts and bolts on the passenger side of my RHD Ex-MOD SIII. Before I started my brakes were always fine. Since the repair, I can't seem to get the brakes going. I have adjusted the brakes per the manual, bleed the brakes per the manual, checked the fluid, and checked everything else I can think of. When I bleed the brakes I can get good pressure on the pedal, then the very next time I press the pedal it goes to the floor and I have to pump it up to get any brakes. I also went ahead and bleed all four wheels while I was at it. I can't find any leaks, all the air is out of the lines, and I have plenty of fluid. What the hell is going on???
|
