Slip joint goes rearmost. What propshaft are you using? Did you buy a kit from someone? They should have provided fixing hardware, or at the least told you what you need.
Take the input flange to the hardware store and match them.
You'll probably get some fluid loss, but shouldn't be much, unless you replace the seal too, which would probably be a good idea.
If you don't have a seal, I have a seal and nyloc nut (which should be replaced too) kit for the Rover diffs. $20.
__________________
Tom Rowe
Atlanta, GA
Four wheel drive allows you to get stuck
in places even more inaccessible.
62 88 reg
67 NADA x2
74 Air Portable - The Antichrist (tag 6A666)
95 D1 - R380
95 D90 - R380
|
