Quote:
Originally Posted by antichrist
I don't know what p76 is telling you, he's so thick headed I decided to put him on ignore.
|
What I am trying to tell him is that a bolt from the hardware store will have the threaded part where it passes through the flange. The thread will collapse with the force of the drive and could cause the connection to come lose. The bolt must have the unthreaded portion nearly through both flanges. You might have to get a longer bolt to get the unthreaded section the right length and then cut it down to the right length
If you have me on ignore, stop quoting me. I am becoming a firm believer that you are the Antichrist.
