Quote:
Originally Posted by Ben Rover
Tragedy! The bolt I had in the flange broke in it... 
Any idea how to get this out? I read on an old Discoweb thread to hack it out |
Do you mean a bolt you had screwed in to the centering peg at the red line? The sruface indicated by the "62" is coated with loc-tite.
You might try a screw extractor. But if you were using a hardened bolt you might have a hard time drilling it out for the screw extractor.
I've found the best extractors are the type shown below (I think I got mine from Matco Tools)
If you get the bolt out, most people find the centering peg comes out better after applying heat.
