Pual Grant is your man, he has an ebay store, good prices, lots of free advice. He found an ignition switch for me and a how to replace.
I had the same abs pump issue, check the relay, i think they fail on but check it out before you replace the pump. Its under the drivers seat edge closest the door, just remove the seat support covers, two minutes with a philips screw driver and you will see:
blue relay-three fuses-black relay-black relay(this is the abs pump relay)-giant 30amp fuse. also check the fuses, could be something simple.
swap the two black relays and see if the pump runs, if it does auto zone actually had the relay, its not labled for a rover just take it in and see if they can match it.
I also would not recommend driving without the pump nor would I recommend buying an element unless your ready to turn in your manhood.
|
