Quote:
Originally Posted by UsedBlue
we did just now put it in and pull the fuel injector/pump fuses- it seems to be okay besides the #02 the display is showing up. It was #48 for the idle and now the code 02 is showing. that is why we just jumped on here to see what is wrong with her now!
The Check Engine light is off for the moment- but the speed sensor isn't working so I'm not sure if the light will come back on for that.
We are now looking for a new muffler- she cracked all the way around just after the clamp, after the cats- thank God- and now my shifter area is getting really hot. We looked for the shield and couldn't find one - i thought it was supposed to be above the front muffler area and it isn't but we've never had a heat problem before the muffler went bad.
So, we're going to check code 02 and see what that's all about.
I'll post again after we see if the new stepper motor fixed the stalling problem. It only stalled when i was coming to a quick stop and right off the highways too. fingers crossed!
thanks again to all for the help!
|
Code 02: Battery Recently Disconnected
Code 02 indicates that the Engine Control Module (ECM) has just been reconnected. Switch the ignition switch to position II to clear code 02.
