Quote:
Originally Posted by cookingwithfat
So, I found an interesting thing when going back to work on the cooling system. I noticed that one of the wires was loose from the distributer. When I looked closer I found that a second one was more then likely not attached as well, and two more that were awfully loose.
|
this could be causing the code 25 that you have been getting. I would suggest replacing the wires with new ones as well, or at the very least check the current wires for any damage to them.
I read through the thread about this on muddyoval and they are still trying to say it is because it has the wrong injectors, which from my understanding is wrong information on their part. I wouldn't touch the injectors just yet. Get the wires put in correctly and test drive it. If it is still having issues proceed with more testing before throwing anymore parts into it.
