OJ's DNA, that is the exact symptom I had. I read some other posts that said you can take the throttle body off to do it, or be patient. I had patience and bought a small quarter inch socket wrench and used the 5.5mm socket. I used a very small amount of gasket seal, just to hold it in place in that tight spot. MAKE sure the engine is cool and you open the coolant tank to release the pressure before you unfasten the tubes. Don't ask me how I know, but I am glad the coolant was somewhat cool. No leaks today, crossing my fingers!!
unstable, I have not been a DI. Still active though.
helievacpilot, Thank you for the response. You are right, it was easy, just needed patience. Definitely be very careful with the little screws.
|
