If the light doesn't go out after driving for a while or a few days it may just be that the ABS sensor has to be pushed back in. It's usually the front ones. It follows the front brake lines to the top of the swivel pin and is covered in a ribbed plastic sheath. Clean the area real good and just carefully tap the sensor down. It can be done without removing the tire but it's a little harder to reach. I would try that first. Those sensors are pretty expensive if you have to replace them.
__________________
Adrian Strata
www.4x4ag.com
98 DI
34x10.50 Simex JT
2.5" SR lift
Evo Kit
91 RRC parting out
|
