Terry...
- Thumbs up on the M1, but what would you recommend for the Oil Filter? Remember, I also do lots of city driving. LR Filter?
- hmm, my coil pack works just fine, I'll look into those 7mm.
- One wrench???
- The 50/50 mix, I've read of other guy's experiences doing this, Good lubrication / the thicker substance shouldnt leak / however, still thin enough to drain
- I'll be replacing the left rotor while replacing the CV, its the Right one that im expecting to be a biaashh
- ABout the cats, thought about that ahead of time, they've all been trapped and released in FAARRR Away "under-contruction" communities
.....seriously!
- Thanks for the info on the captioned images...had no clue of the severity.
Dent...
Thanks man. Do you have a pic or a link to a pic of a press? I might have this on the non-Craftsman side of the shop with all of my dad's old tools whos functions I dont know.
Sven...
Thanks for the info onteh gasket. I learned this from my old 65 Mustang, not only do the cork ones crack over time, when the time comes to remove the covers, you need to pry them out, potentially damaging the egdes of the covers. The rubber ones turn into a thick goo like substance which can be removed by hand, but still using some force.
steering box....dang that makes sense! (more leaky steering pics at the bottom of this post)
John...
OUCH!..That serious eh? Unfortunately, I think I'll have to take it to the stealership for the main seal issue...unless I can drink or eat something to make my cojohns big enough to do the job myself.
Plugs, which ones should I be lookin at? I DO like the 8mm and I totally dig anything with the word "upgrade" in it, in regards to the coil pack. Who makes'em?
You and I will DEFINATELY be in touch for this steering issue. Now that I'm SUFFERING with the painful sounds of a badly damaged CV while making turns, I dont want to hear anything similar ever again coming from my steering components.
I'll clean the underside tomorrow when I come back from light muddin.
I'll go lookin for those zebra clamps right after i hit the "submit reply" button.
Definately clamp issues, dont you think..lol.....
THANKS FOR ALL THE REPLIES GUYS!!!! 
