Well I cleaned out the fire trap and found a broken T fitting on the hose coming from the fire trap. Replaced that. Pulled off the idle control valve and found a little carbon build up which I cleaned off. I have tried to figure out exactly how it was supposed to work, which just from looking at it the spring loaded plunger lookes like it would compress against the hole the plunger fits into. But in playing with mine, I could not get the plunger to move and was wondering if it is mounted on a screw shaft? I am still having the same problems, plus I have noticed that it does not idle well once it is warmed up a little, not to mention it is difficult to start. Any other suggestions as to where to look?
