Quote:
|
Originally Posted by susyhutch
Do you have any info on removal of fuel filter from TD4, workshop manual no help.
|
The filter is on the left hand side of the engine compartment bulkhead.
Unscrew the filter housing and lift the housing - tilting away from the bracket. Disconnent the wiring multiplug
Put rags under the filter. Note locations of fuel hoses etc. Depress retaining clips and disconnect hoses.
Lift filter and filter head from bracket then unscrew the filter.
To install new filter - lubricate the sealing ring with engine oil and fill the filter with diesel. Screw in the filter to the filter head until just tight - hand turn a further 180 degrees.
Refit to the housing
Reconnect hoses as electrical connector - tighten
Apparently nothing else is required eg no pumps or primer or bleeding etc.
