Took out and cleaned entire fusebox, all conections, relays, fuses, etc. Fusebox is in good shape. I tested the relay-works fine-even swapped it. Problem is, the ground signal is not actually appearing to the fuse box terminal, which I traced to it not being sent from the BeCM terminal #2 yellow plug. Question is, why is the BeCM not sending the signal? I'm hoping it is because the neutral switch is junk and not allowing it to start.
__________________
Current:
2005 Land Rover LR3 V8 SE w/ factory winch
1992 Land Rover Range Rover County
Also current:
1995 Mercedes-Benz E320 Wagon
2002 Volkswagen Eurovan GLS
1996 Ford Explorer LTD 2WD
1982 Volvo 240 GL Diesel
Previous Rovers:
2000 Land Rover Discovery II SD
1995 Range Rover 4.0SE
|
