personally...i would just put a small screwdriver or something through the hole in the pin where the pin goes that holds the disconnect on. this will keep it from spinning and then you can use a box wrench or socket to get the nut off....i hope this help!
__________________
Moderator of the East Coast and Discovery 2 sections!
2001 Disco II SE w/CDL
~Equipe 4x4 Winch Bumper
~Custom steel rear bumper
~Equipe 4x4 steering skid and radiator skid
~RTE rocksliders
~QT services front and rear diff guards
~2" RTE lift
~265/75 r16 Federal Couragia MTs
~Superwinch X9
~Safety Devices Roof Rack
|
