I have wired two of the three hellas together on one relay as is customary. However, they do not light. I have checked the power leaving relay and it is okay. However when I check the power going from the relay to the lights there seems to be no power coming through. Here is what I have done. Lights are set up to come on with high beams. I have two splices on one high beam wire (is this okay?). I have switched the relays out with same result, nada. Does the length of wire going from relay to lights play a role in not working. Is there such a think as too long of wire? All the wire is 14g. The only thing I have not tried is to switch out one of the hellas and place it in a working light. Finally, I plan on wiring the third hella by itself through a different relay. Could have too may lights grounded to one ground location? I am very frustrated and could use guidance over here.
Thanks in advance peeps!
