Quote:
|
Originally Posted by steelbreakfast
How do I wire around an electrical problem in the brakelights in my Defender 90?
I suggest you run a switched lead straight from the battery into a toggle, and then to the rear lights. Each time you stop, just flick the switch and viola! You've got brakelights too - this could be in the Defender section, and also doubled in a DIY format. Great!
|
This is really NOT a recommended fix
Sort it properly!
if you need to bodge the circuit to get you going then take a lead direct from the battery pos terminal into the brake light switch (take a look under the dash at the top of the brake pedal armature) then direct to the lamps, do not rely on a manual switch. If this doesnt work then it is the brake light switch that is at fault and replace it.
