mounts
hi the one inch lower the mounts are too high who ever had her befor cut and welded the mounts to change from a six pot to a 4 pot diesal
so when ive gone to fit the 2.5 110 lump shes out too far so i cut the mounts of and started again now i find when i fit the gear box cover it just touchs the cover so ive got to drop her lower in the mounts by at least one inch to clear but she sits low as she is crazy and the engine is much the same as the old one nice to have five berarings in the crank less flex....the heater hose are the same but its not got the feed at the rear of the head for the heater
|
