I think you are right about the u bolt story, had a look at my springs on the rhs. They should I presume line up with each, some seem to be displaced a little left and right. I think I will have to take my 4 pound hammer and knock them back in line and the tighten up the bolts.
I also noticed that the second leave the wraps around the first leave at the bushes has lost that bit tha wraps around if you get my drift. Hope is wont be a problem if I can tighten up the u-bolts good enough.
The tie rod ends might also need a look at as, I noticed that the fron wheels are wearing unevenly. There is more wear on the outer face than on the inner face. Any suggestions on what to do here would be appreciated.
Cheers
Jayce
