Going to start rebuilding the top end of my 3.5. I have new cam, lifters, rods, and timing chain coming along with all the needed gaskets. I'm going with composite gaskets on the heads and intake. And the rubber gaskets on the valve covers.
So my first batch of questions (I'm sure I'll have a lot more to come), what other supplies do I need? I know I need Vaseline for the oil pump, Loctite for some bolts, and antiseize for others, but what other odds and ends will I forget?!?
Do I need new valve cover screws with the rubber gasket?
What is good way to clean up the inside of the engine and parts that are going back on?
And a
Big Thanks to Okie and GregM for the encouragement in my previous post.
