bulkhead removal bars - Land Rovers Only

Snagger · 09-20-2004, 11:36 AM

First, does anyone have exerience of fitting a rear bulhead removal bar (like those fitted on new D90 SWs? EvansUK produce them, and I'm planning to fit one to replace the damaged bulkhead on my vehicle.

Second, the vehicle in question is a 109, and though I'm nearly certain the measurements at the front of the tub are the same as Defenders, I'd appreciate confirmation, or indeed, contradicton, if anyone knows better!

lrmaniac · 09-20-2004, 04:14 PM

Well, there was a magazine ( LRe or LROi ) a few months ago that had a fotos for DIY bulkhead replacement like the one you described, and I've seen pictures somewhere in the web.
I'll try to find it again!

Snagger · 09-21-2004, 10:57 AM

The company's website is on www.evansuk.ltd.uk - I had a good look and I reckon it'll fit, but I was trying to get opinions from anyone who has fitted one. I suppose it's too new a product - I'll get one and let you all know how I get on in a couple of months.

heritage · 09-26-2004, 01:48 AM

there is an alternative bulkhead replacement bar made by I think Mud UK. It is easier to fit, as you don't have to chop out the whole bulkhead. It is a bar which replaces the upper section just above the level of the wheelboxes. I think it costs about £80.

09-20-2004, 11:36 AM	#1 (permalink)
Snagger Senior Member Join Date: Sep 2004 Location: Bedford, UK Posts: 125 Gallery: 0	bulkhead removal bars First, does anyone have exerience of fitting a rear bulhead removal bar (like those fitted on new D90 SWs? EvansUK produce them, and I'm planning to fit one to replace the damaged bulkhead on my vehicle. Second, the vehicle in question is a 109, and though I'm nearly certain the measurements at the front of the tub are the same as Defenders, I'd appreciate confirmation, or indeed, contradicton, if anyone knows better! __________________ It's not broken; it's British

09-20-2004, 04:14 PM	#2 (permalink)
lrmaniac Member Join Date: Aug 2004 Location: Lisbon, Portugal Posts: 36 Gallery: 0	Well, there was a magazine ( LRe or LROi ) a few months ago that had a fotos for DIY bulkhead replacement like the one you described, and I've seen pictures somewhere in the web. I'll try to find it again! __________________ Thank you Joao Pedro Defender 90 Td5; 1966 88"SIIA

09-21-2004, 10:57 AM	#3 (permalink)
Snagger Senior Member Join Date: Sep 2004 Location: Bedford, UK Posts: 125 Gallery: 0	The company's website is on www.evansuk.ltd.uk - I had a good look and I reckon it'll fit, but I was trying to get opinions from anyone who has fitted one. I suppose it's too new a product - I'll get one and let you all know how I get on in a couple of months. __________________ It's not broken; it's British

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

09-26-2004, 01:48 AM	#4 (permalink)
heritage Member Join Date: Sep 2004 Location: cheltenham, gloucestershire Posts: 2 Gallery: 0	there is an alternative bulkhead replacement bar made by I think Mud UK. It is easier to fit, as you don't have to chop out the whole bulkhead. It is a bar which replaces the upper section just above the level of the wheelboxes. I think it costs about £80.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)