roll cages - Land Rovers Only

smigger · 01-07-2005, 09:48 AM

HI ll

Wondered if anyone could point me in the right direction to get a roll cage fitted - just for safety front and rear hoop - without it costing an arm and a leg. everywhere I go seems to be upto @ £1000 !!

Would be grateful if anyone knows anyone etc

thanks

Smiggers

Disco Mike · 01-07-2005, 11:21 AM

Check out your local welding shops, they can bend tubing and weld it up for alot less then what you would have to spend to buy a ready made cage.
I did this for both of my bumpers and sliders and landed up with a better set up then I could have bought from the market.
Mike J.

xpower racer · 01-10-2005, 10:23 PM

To be safe I would go to "Safety Devices" www.safetydevices.co.uk . Be carefull you dont end up getting somthing that is purly cosmetic that some places sell.

You could also try www.qtservices.co.uk I'm sure they do some too.

I'll be getting a full external cage for my 90 from Safety Devices by the summer hopefully... Cant wait.. means I can risk more offroading

zeff · 01-11-2005, 01:44 PM

Quote:

Originally Posted by smigger

HI ll

Wondered if anyone could point me in the right direction to get a roll cage fitted - just for safety front and rear hoop - without it costing an arm and a leg. everywhere I go seems to be upto @ £1000 !!

Would be grateful if anyone knows anyone etc

thanks

Smiggers

hi pal, where in england are you? me and my two mates ( all timed served engineers / coded welders ) started making cages about four years ago, just to pay for our hobby, weve done 34 so far plus full chassis etc, we could do the work for a fraction of that!!! e-mail me on howie@clarke737.fsnet.co.uk

smigger · 01-13-2005, 09:14 AM

Thanks Mike Will do

Tim

smigger · 01-13-2005, 09:16 AM

Thanks - I have visited the sites - looks good

01-07-2005, 09:48 AM	#1 (permalink)
smigger Member Join Date: Jan 2005 Posts: 4 Gallery: 0	roll cages HI ll Wondered if anyone could point me in the right direction to get a roll cage fitted - just for safety front and rear hoop - without it costing an arm and a leg. everywhere I go seems to be upto @ £1000 !! Would be grateful if anyone knows anyone etc thanks Smiggers

01-10-2005, 10:23 PM	#3 (permalink)
xpower racer Senior Member Join Date: Jan 2005 Location: Romania is my base now but I work overseas Posts: 192 Gallery: 0	To be safe I would go to "Safety Devices" www.safetydevices.co.uk . Be carefull you dont end up getting somthing that is purly cosmetic that some places sell. You could also try www.qtservices.co.uk I'm sure they do some too. I'll be getting a full external cage for my 90 from Safety Devices by the summer hopefully... Cant wait.. means I can risk more offroading __________________ 1985 Landrover 90 200TDi Disco engine, Disco rear axle, 2 inch lift and BLACK Recovery Romanian style :-S http://www.youtube.com/xpowerracer yup...its me :-)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

01-07-2005, 11:21 AM	#2 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,771 Gallery: 0	Check out your local welding shops, they can bend tubing and weld it up for alot less then what you would have to spend to buy a ready made cage. I did this for both of my bumpers and sliders and landed up with a better set up then I could have bought from the market. Mike J.

01-13-2005, 09:14 AM	#5 (permalink)
smigger Member Join Date: Jan 2005 Posts: 4 Gallery: 0	Thanks Mike Will do Tim

01-13-2005, 09:16 AM	#6 (permalink)
smigger Member Join Date: Jan 2005 Posts: 4 Gallery: 0	Thanks - I have visited the sites - looks good

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)