Advice on which mods - Land Rovers Only

LR123 · 08-04-2006, 07:14 PM

I have a 2002 Black Freelander SE and about $1200 to spend. I've looked at a bunch of accessories and wanted to know what you think I should get.

The possibilities are:

-DAP HD A-Frame: $700 after shipping
-Reese tow hitch: $130
-Crossbars: $150
-SliderZ: $500
-Light Guards front/rear: $120/$120

If you guys want to add anything to the list or if any of you know where to get these parts for cheaper please let me know. Thanks!

rmuller · 08-04-2006, 07:16 PM

Do you offroad it often? From what I've seen of Freelanders wheeling, the first three mods should be:

1. Lift
2. More aggressive tires
3. Sliderz

LR123 · 08-04-2006, 07:28 PM

I offroad some, but I don't know if I want the lift. How much side slope and on-road driving performance will be lost? I'm also waiting for my Michellin hydroedge tires to wear out so that I can get some Pirelli Scorpions 235/65/17.

rmuller · 08-04-2006, 07:44 PM

I dont think you'll have any adverse effect on drivablity with a lift.. you may want to check out the forums at http://www.muddyoval.com/ .. there are a lot more freelander owners there.

LR123 · 08-04-2006, 07:47 PM

Yeah I love muddyoval. (I'm freelander313 there)

lagged · 08-06-2006, 09:46 PM

I would get some 16" rims and 225/70/16 BFG AT/KOs. They are by far the best mod I've done. After that, maybe the Mantec skid plate or Sliderz, depending on what you are going for.

LR123 · 08-08-2006, 04:06 PM

I've heard that the lift voids your warranty though. Is that true?

jaguiler · 08-11-2006, 06:51 PM

hey go all out and get some Ranger rims and then get the BFG's - can't beat em

Rmuller has seen mine in action - with my homemade sliders.....

I would say first and foremost get the Mantec skid plate or make a skid plate (RonC) - the Mantec is worth it's weight in gold !!!! trust me...

that being said the next is more ground clearance -

08-04-2006, 07:14 PM	#1 (permalink)
LR123 Member Join Date: Jun 2006 Location: Florida Posts: 60 Gallery: 0	Advice on which mods I have a 2002 Black Freelander SE and about $1200 to spend. I've looked at a bunch of accessories and wanted to know what you think I should get. The possibilities are: -DAP HD A-Frame: $700 after shipping -Reese tow hitch: $130 -Crossbars: $150 -SliderZ: $500 -Light Guards front/rear: $120/$120 If you guys want to add anything to the list or if any of you know where to get these parts for cheaper please let me know. Thanks!

08-04-2006, 07:16 PM	#2 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,370 Gallery: 0	Do you offroad it often? From what I've seen of Freelanders wheeling, the first three mods should be: 1. Lift 2. More aggressive tires 3. Sliderz __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

08-04-2006, 07:44 PM	#4 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,370 Gallery: 0	I dont think you'll have any adverse effect on drivablity with a lift.. you may want to check out the forums at http://www.muddyoval.com/ .. there are a lot more freelander owners there. __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-04-2006, 07:28 PM	#3 (permalink)
LR123 Member Join Date: Jun 2006 Location: Florida Posts: 60 Gallery: 0	I offroad some, but I don't know if I want the lift. How much side slope and on-road driving performance will be lost? I'm also waiting for my Michellin hydroedge tires to wear out so that I can get some Pirelli Scorpions 235/65/17.

08-04-2006, 07:47 PM	#5 (permalink)
LR123 Member Join Date: Jun 2006 Location: Florida Posts: 60 Gallery: 0	Yeah I love muddyoval. (I'm freelander313 there)

08-06-2006, 09:46 PM	#6 (permalink)
lagged Member Join Date: May 2006 Posts: 7 Gallery: 0	I would get some 16" rims and 225/70/16 BFG AT/KOs. They are by far the best mod I've done. After that, maybe the Mantec skid plate or Sliderz, depending on what you are going for.

08-08-2006, 04:06 PM	#7 (permalink)
LR123 Member Join Date: Jun 2006 Location: Florida Posts: 60 Gallery: 0	I've heard that the lift voids your warranty though. Is that true?

08-11-2006, 06:51 PM	#8 (permalink)
jaguiler Member Join Date: May 2006 Posts: 71 Gallery: 0	hey go all out and get some Ranger rims and then get the BFG's - can't beat em Rmuller has seen mine in action - with my homemade sliders..... I would say first and foremost get the Mantec skid plate or make a skid plate (RonC) - the Mantec is worth it's weight in gold !!!! trust me... that being said the next is more ground clearance -

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)