Well-here's the answer, for all those dying to know!!
It was a little less cold outside, so I poked around a bit more and discovered that the interior door handle, which is half black and half silver, splits in half!! You pry the bottom half away from the top half, which reveals the three screws necessary to finish removing the door panel. It took me literally 15 min more to remove the plastic protective film, drop the window, and remove the regulator assembly.
Currently used the cardboard tip to hold the window up (with a nylon zip tie through the window bracket into the access holes in the door skin to prevent the window from falling and shattering) until summer comes round, and I will buy the new assembly. Looks as good as new-just won't work til summer!!!!
Thanks!
Julian
|