4.2L Motor w/less than 80K - Land Rovers Only

Paul Grant · 06-23-2008, 05:26 AM

I have the 4.2L motor out of a 1993 Range Rover LWB for sale. The motor has under 80K miles on it. The heads were redone a couple of years back and the cam was replaced along with the timing chain.. The motor was running well and compression was even across the cylinders. From what the owner told me, the work was performed by Rover Specialists of Dumont, NJ.

The motor will be out of the truck and ready for shipping by mid week. You can have it as a complete motor (minus the distributor) from the plenum down to the oil pan, from the water pump to the flex plate for $900. That includes all the sensors (minus the MAF) as well and the motor was not showing any codes.

Shipping is paid for by the buyer. I typically use Forward Air but you can also pick the motor up in northwestern CT.
Thanks,
Paul

GreatDivide1 · 07-13-2008, 06:53 PM

hey paul i forgot to say thanks!!!! got the axle shaft right away!!! thanks again...

now do you have any lift springs for a d1 or any other goodies ???a freind just bought one and is trying to out fit it thanks Don

Paul Grant · 07-14-2008, 03:30 PM

Hey Don,
I'm glad I could be of help. As far as springs are concerned, you have to keep an eye on my eBay Store. In the last two weeks I sold a set of OME's (751's & 762's) that were in very good shape and a set of practically new Big Blues. You never know what goodies will come in on the next truck.
Cheers,
Paul

Paul Grant · 07-14-2008, 03:30 PM

Oh, and I forgot to mention that the 4.2L has been sold.

06-23-2008, 05:26 AM	#1 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 911 Gallery: 0	4.2L Motor w/less than 80K I have the 4.2L motor out of a 1993 Range Rover LWB for sale. The motor has under 80K miles on it. The heads were redone a couple of years back and the cam was replaced along with the timing chain.. The motor was running well and compression was even across the cylinders. From what the owner told me, the work was performed by Rover Specialists of Dumont, NJ. The motor will be out of the truck and ready for shipping by mid week. You can have it as a complete motor (minus the distributor) from the plenum down to the oil pan, from the water pump to the flex plate for $900. That includes all the sensors (minus the MAF) as well and the motor was not showing any codes. Shipping is paid for by the buyer. I typically use Forward Air but you can also pick the motor up in northwestern CT. Thanks, Paul __________________ Paul Grant paulgrant@mac.com http://stores.ebay.com/Classic-Rovers 203-770-1699

07-13-2008, 06:53 PM	#2 (permalink)
GreatDivide1 Senior Member Join Date: Dec 2007 Location: dover nh Posts: 183 Gallery: 0	hey paul i forgot to say thanks!!!! got the axle shaft right away!!! thanks again... now do you have any lift springs for a d1 or any other goodies ???a freind just bought one and is trying to out fit it thanks Don __________________ 91 G.D.E. project/daily winter driver 93 BMW 325i project/daily summer driver:SOLD: 00 BUELL cyclone custom http://www.snhlr.org/

07-14-2008, 03:30 PM	#3 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 911 Gallery: 0	Hey Don, I'm glad I could be of help. As far as springs are concerned, you have to keep an eye on my eBay Store. In the last two weeks I sold a set of OME's (751's & 762's) that were in very good shape and a set of practically new Big Blues. You never know what goodies will come in on the next truck. Cheers, Paul __________________ Paul Grant paulgrant@mac.com http://stores.ebay.com/Classic-Rovers 203-770-1699

07-14-2008, 03:30 PM	#4 (permalink)
Paul Grant Senior Member Join Date: Jun 2005 Location: CT Posts: 911 Gallery: 0	Oh, and I forgot to mention that the 4.2L has been sold. __________________ Paul Grant paulgrant@mac.com http://stores.ebay.com/Classic-Rovers 203-770-1699

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complete 4.2L Motor w/109K miles F/S	Paul Grant	Land Rover Parts and Accessories	9	10-02-2007 08:19 AM
measuring vacuum on a 4.2L motor	deadboy1977	Range Rover Classic	1	07-01-2007 01:45 AM
F/S Range Rover Classic 4.2L & 3.9L Short Blocks	Paul Grant	Land Rover Parts and Accessories	1	10-26-2006 05:14 AM
Timing 4.2L	RageRover	Range Rover Classic	28	03-01-2006 04:38 PM
surging erratic idle in my 4.2L Classic LWB	korn_rover	Range Rover Classic	7	10-11-2004 03:13 PM