Disco II Brand New Transfer Case for sale! - Land Rovers Only

UsedBlue · 04-10-2007, 02:58 PM

This has less than 2k miles on it!! It has no problems at all except for a plastic connecter is cracked, cheap and easy to replace!!

Buyer pays shipping- this baby is nice!!

Email me for offers!

rmuller · 04-10-2007, 03:30 PM

The most important question is: Does it have the CDL nipple on it? If its from 1999, 2000 or 2004 it will.. if its from a 2001 there is a 50/50 chance.

UsedBlue · 04-10-2007, 03:35 PM

Not sure, I can email you some pics - will you be able to see it? I know nothing about this part except for I bought it for my Disco I, my dealer said it WAS compatable, and it has less than 2k on it. If you'd like pics, then please give me your email address and if you have specific shots you'd like to see let me know.

rmuller · 04-10-2007, 03:40 PM

Here is the CDL mechanism, this whole plate, the 3 bolts and the bolt (aka nipple) sticking out in the middle:

rmuller · 04-10-2007, 03:41 PM

If it has that, then the center diff (CDL) is lockable and more desirable.

UsedBlue · 04-10-2007, 04:11 PM

I just took some pics, again, I know nothing about this part but as soon as i figure out how to shrink the heck out of these pics i'll post them soon.

UsedBlue · 04-10-2007, 04:17 PM

rmuller · 04-10-2007, 04:19 PM

Hmm, can't tell by that pic, I'll PM you my email address if you want to send the bigger pics.

UsedBlue · 04-10-2007, 04:21 PM

[attach]

[/attach]

UsedBlue · 04-10-2007, 04:21 PM

i just don't know which end we're looking at!

rmuller · 04-10-2007, 04:24 PM

I think from the last picture, you can see a circle where it should be right above and to the left of the output shaft.. can't really tell though due to the size.

UsedBlue · 04-10-2007, 04:25 PM

One last thought- when they said it wasn't the right model, they said they may be able to make it work to where it was either locked all the time or to never lock- not sure if that helps or not.

We ended up getting the correct case for our 94 and it works fine, i just need to get rid of this one!! I've never seen one this new being sold before

rmuller · 04-10-2007, 04:30 PM

Yup, thats the problem.

Disco1s had center diff lock (the handle that goes low-to-high range, can also go to the left, which locks both of your axles together for equal power distribution between the two)..

Disco2s did not have it, but they did use the same transfer case for the first 2 years, so thats why I asked the question as to if it had it or not... if on the disco2 you had the 'nipple' you could add a linkage to engage it.

The 'CDL-enabled' cases are desirable for offroaders who have 01-03 trucks who want the CDL capabilities... if you're not planning on doing much offroading driving, the regular transfer case is fine.

I'd recommend trying EBay, I see them go for a good amount of money there...

04-10-2007, 02:58 PM	#1 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0	Disco II Brand New Transfer Case for sale! This has less than 2k miles on it!! It has no problems at all except for a plastic connecter is cracked, cheap and easy to replace!! Buyer pays shipping- this baby is nice!! Email me for offers!

04-10-2007, 03:30 PM	#2 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,417 Gallery: 0	The most important question is: Does it have the CDL nipple on it? If its from 1999, 2000 or 2004 it will.. if its from a 2001 there is a 50/50 chance. __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

04-10-2007, 03:40 PM	#4 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,417 Gallery: 0	Here is the CDL mechanism, this whole plate, the 3 bolts and the bolt (aka nipple) sticking out in the middle: __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

04-10-2007, 03:41 PM	#5 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,417 Gallery: 0	If it has that, then the center diff (CDL) is lockable and more desirable. __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

04-10-2007, 04:11 PM	#6 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0	pics of the case I just took some pics, again, I know nothing about this part but as soon as i figure out how to shrink the heck out of these pics i'll post them soon.

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

04-10-2007, 03:35 PM	#3 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0	Not sure, I can email you some pics - will you be able to see it? I know nothing about this part except for I bought it for my Disco I, my dealer said it WAS compatable, and it has less than 2k on it. If you'd like pics, then please give me your email address and if you have specific shots you'd like to see let me know.

04-10-2007, 04:17 PM	#7 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0

04-10-2007, 04:19 PM	#8 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,417 Gallery: 0	Hmm, can't tell by that pic, I'll PM you my email address if you want to send the bigger pics. __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

04-10-2007, 04:21 PM	#9 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0	these are the last 2 [attach][/attach] Attached Thumbnails

04-10-2007, 04:21 PM	#10 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0	i just don't know which end we're looking at!

04-10-2007, 04:24 PM	#11 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,417 Gallery: 0	I think from the last picture, you can see a circle where it should be right above and to the left of the output shaft.. can't really tell though due to the size. __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

04-10-2007, 04:25 PM	#12 (permalink)
UsedBlue Member Join Date: Apr 2007 Posts: 84 Gallery: 0	One last thought- when they said it wasn't the right model, they said they may be able to make it work to where it was either locked all the time or to never lock- not sure if that helps or not. We ended up getting the correct case for our 94 and it works fine, i just need to get rid of this one!! I've never seen one this new being sold before

04-10-2007, 04:30 PM	#13 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,417 Gallery: 0	Yup, thats the problem. Disco1s had center diff lock (the handle that goes low-to-high range, can also go to the left, which locks both of your axles together for equal power distribution between the two).. Disco2s did not have it, but they did use the same transfer case for the first 2 years, so thats why I asked the question as to if it had it or not... if on the disco2 you had the 'nipple' you could add a linkage to engage it. The 'CDL-enabled' cases are desirable for offroaders who have 01-03 trucks who want the CDL capabilities... if you're not planning on doing much offroading driving, the regular transfer case is fine. I'd recommend trying EBay, I see them go for a good amount of money there... __________________ Ryan :: Off-Road/Accessories Moderator :: Gallery 2001 Discovery II \| 1994 Defender 90 #416

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode