tjm? - Land Rovers Only

drum655 · 12-27-2005, 05:54 PM

i am about to buy a tjm bumper....anyone got any comments about this product, and can anyone tell me the best place with the best price to buy it? it is either a tjm or a voyager bumper, i am leaning toward tjm for its airbag compatibleness!!! any info would be greatly appreciated!!!

SCSL · 12-27-2005, 05:57 PM

I would recommend Safarigard or Rovertym for the better front-end clearance/approach angle. Just my .02

keptin · 12-27-2005, 06:00 PM

I was going to go TJM or ARB before I realized that they kinda suck. They have to be huge because they house the winches inside of them....for that same reason they can only hold small winches.....and have bad approach angles because they stick out to hold the winch.

I am 100% RTE now, I think that thier bar rocks and it is undoubtedly the most heavy duty bar out there (thats not custom).

I know TJM is better then ARB.....but seeing all those ARB's crushed up into the grill of rovers makes me hesitant on considering using the crush cans that make it air bag compatable in the first place.

...I wonder, do our rovers have any way to deploy the airbag without crushing??? ..inertial sensors??

..tractor beam??

...One good point to bring up is that the crush cans themselfs will provide an impact crush zone so you dont get the full impact directly through the frame.

keptin · 12-27-2005, 10:07 PM

<<This thread has been moved to the Accessories section>>

12-27-2005, 05:54 PM	#1 (permalink)
drum655 Moderator Join Date: May 2005 Location: Peachtree City, GA Posts: 949 Gallery: 0	tjm? i am about to buy a tjm bumper....anyone got any comments about this product, and can anyone tell me the best place with the best price to buy it? it is either a tjm or a voyager bumper, i am leaning toward tjm for its airbag compatibleness!!! any info would be greatly appreciated!!! __________________ Moderator of the East Coast and Discovery 2 sections! 2001 Disco II SE w/CDL ~Equipe 4x4 Winch Bumper ~Custom steel rear bumper ~RTE rocksliders ~QT services front and rear diff guards ~2" RTE lift ~Pro Comp ES9000 2" extended shocks ~Slickrock disconnects ~265/75 r16 BFG AT's ~Superwinch X9 ~Safety Devices Roof Rack

12-27-2005, 06:00 PM	#3 (permalink)
keptin Roads?...Where we're going, we don't need roads... Join Date: Oct 2005 Location: Reno, NV Posts: 2,365 Gallery: 0	I was going to go TJM or ARB before I realized that they kinda suck. They have to be huge because they house the winches inside of them....for that same reason they can only hold small winches.....and have bad approach angles because they stick out to hold the winch. I am 100% RTE now, I think that thier bar rocks and it is undoubtedly the most heavy duty bar out there (thats not custom). I know TJM is better then ARB.....but seeing all those ARB's crushed up into the grill of rovers makes me hesitant on considering using the crush cans that make it air bag compatable in the first place. ...I wonder, do our rovers have any way to deploy the airbag without crushing??? ..inertial sensors?? ..tractor beam?? ...One good point to bring up is that the crush cans themselfs will provide an impact crush zone so you dont get the full impact directly through the frame. __________________ Josh Shapiro DII Photos at www.kep1.com

12-27-2005, 10:07 PM	#4 (permalink)
keptin Roads?...Where we're going, we don't need roads... Join Date: Oct 2005 Location: Reno, NV Posts: 2,365 Gallery: 0	<<This thread has been moved to the Accessories section>> __________________ Josh Shapiro DII Photos at www.kep1.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

12-27-2005, 05:57 PM	#2 (permalink)
SCSL Wheeler Join Date: Apr 2005 Posts: 1,841 Gallery: 0	I would recommend Safarigard or Rovertym for the better front-end clearance/approach angle. Just my .02

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)