Will it fit? - Page 2 - Land Rovers Only

fivespddisco · 02-22-2007, 03:24 PM

TN this is about all the stuff you need with out the shocks I my have a set of diffs from a 96 disco you could upgrade too. i think it is a bolt up for the 10 spline. but we would need to look into it more

01001010 · 02-22-2007, 03:30 PM

nothing but sexyness...

MuddyRangeRover · 02-22-2007, 04:18 PM

What brand is that?

fivespddisco · 02-22-2007, 04:52 PM

Equipe

MuddyRangeRover · 02-22-2007, 05:38 PM

Hmm found their site, but no prices.
Are they better than rovertym?
Where are they located?

fivespddisco · 02-22-2007, 06:37 PM

I would like to think my stuff is better then rovertym. It is made in Italy and there is no prices because the flux in the market. some more eye candy

MuddyRangeRover · 02-24-2007, 06:53 AM

Ok, tell me how much for the kit via PM, I will be in the market soon for a 4" lift.

Nomar · 02-24-2007, 08:14 AM

Personally, I dont think it's good manners to jump into a thread and "sell".

I know Steve from RTE and Rob from Draken, both are very good guys and RTE & Equipe both make a nice product...

TN-LR3 · 02-24-2007, 08:50 AM

nevermind shocks got sold, And I have two axles waiting for me in kentucky just got to head up their with my buddies RAM.

i love the look of equipe stuff, but i don't trust the look of that spring dislocating set-up plus i have yalls price list and it ain't cheap

fivespddisco · 02-24-2007, 08:52 AM

Quote:

Originally Posted by Nomar

Personally, I dont think it's good manners to jump into a thread and "sell".

I know Steve from RTE and Rob from Draken, both are very good guys and RTE & Equipe both make a nice product...

I was not trying to hi jack this thread. i put a pic up of all the parts needed for his lift. I did not say buy my parts and i did not even say what they were. some times it helps people to see what they need. when i got into this i thought i was all set with a 2in OME lift well to perform off road you need some other bits. he can just stuff some springs under there and may love it. but you need rear links break lines ................. just trying to help. and yes steve is a great guy and has some good stuff.

TN-LR3 · 02-24-2007, 08:54 AM

After wheeling my D90 and seein some trucks with diff. set-ups, I want to bigger than 2 OME springs. They just didn't cut it for me either

MuddyRangeRover · 02-24-2007, 11:21 AM

guys, please, no need to jump on each others throats. I am learning and asking questions. I know "roughly' what set upi i want to go with, but it always helps to know more. Fivespddisco has been very helpful and informative. True, currently his stuff is a little more expensive than I can afford, but he has made many positive suggestions and offered to help w/ me picking his brain, REGARDLESS of whether or not I will buy his stuff, which looks REAL nice.

My goal is 4", soft springs, rear/front arms, break lines, 32's, great articulation, and durability.
I like to hang with the big boys, so 2" lift ain't gonna cut it.

Roverholic · 02-25-2007, 08:32 PM

Hey TN,
Don’t know if you’ve made the purchase yet but my 2 cents is to go w/ the 10” Fox 2.0’s from Gordon at http://www.inlandrovers.com/. The valving is RIGHT on..butter, butter and more butter. Initially I tried 12” but it wouldn’t work. Buy everything else from RTE and you’re stoked. (Don’t have anything from Equipe, just speaking from what I have on my Classic).
Good luck,
Paul

TN-LR3 · 02-26-2007, 04:13 PM

Thanks roverholic, can you post up some pics of your ride in action maybe? I haven't ordered anything yet but it will Be the full 3' RTE kit, and I might have the funds now to get the bilistiens

02-22-2007, 03:24 PM	#16 (permalink)
fivespddisco Senior Member Join Date: Jan 2005 Location: Equipe,Qt,ARB,Ashcroft dealer Posts: 427 Gallery: 10	TN this is about all the stuff you need with out the shocks I my have a set of diffs from a 96 disco you could upgrade too. i think it is a bolt up for the 10 spline. but we would need to look into it more Attached Thumbnails __________________ Check out WWW.Lucky8LLc.com 716-898-8153 Justin

02-22-2007, 03:30 PM	#17 (permalink)
01001010 Moderator Join Date: Jan 2005 Location: Lawrenceville, GA Posts: 4,543 Gallery: 15	nothing but sexyness... __________________ JC... 1996 Discovery SE - The Blue Marlin - gone =( 1965 Series IIa 109 RHD 2.25L Dsl - Wilks 1965 Series IIa 88' LHD 2.25L Petrol - Fionna

02-22-2007, 04:18 PM	#18 (permalink)
MuddyRangeRover Where is my Black Son? Join Date: Oct 2006 Location: Aurora/Toronto, Ontario, Canada Posts: 496 Gallery: 0	What brand is that? __________________ 1996 Disco 1 SE7- Stock(Awesome sound system) DD/Range Rover hauler. 1990 RRC SWB Camel Trophy Inspired- ARB, Hella's, Bosch's, AR's 15X8, 32"MTR's,Equipe suspension stuff, Skids, waiting for more...

02-22-2007, 04:52 PM	#19 (permalink)
fivespddisco Senior Member Join Date: Jan 2005 Location: Equipe,Qt,ARB,Ashcroft dealer Posts: 427 Gallery: 10	Equipe Attached Thumbnails __________________ Check out WWW.Lucky8LLc.com 716-898-8153 Justin

02-22-2007, 05:38 PM	#20 (permalink)
MuddyRangeRover Where is my Black Son? Join Date: Oct 2006 Location: Aurora/Toronto, Ontario, Canada Posts: 496 Gallery: 0	Hmm found their site, but no prices. Are they better than rovertym? Where are they located? __________________ 1996 Disco 1 SE7- Stock(Awesome sound system) DD/Range Rover hauler. 1990 RRC SWB Camel Trophy Inspired- ARB, Hella's, Bosch's, AR's 15X8, 32"MTR's,Equipe suspension stuff, Skids, waiting for more...

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

02-22-2007, 06:37 PM	#21 (permalink)
fivespddisco Senior Member Join Date: Jan 2005 Location: Equipe,Qt,ARB,Ashcroft dealer Posts: 427 Gallery: 10	I would like to think my stuff is better then rovertym. It is made in Italy and there is no prices because the flux in the market. some more eye candy Attached Thumbnails __________________ Check out WWW.Lucky8LLc.com 716-898-8153 Justin

02-24-2007, 06:53 AM	#22 (permalink)
MuddyRangeRover Where is my Black Son? Join Date: Oct 2006 Location: Aurora/Toronto, Ontario, Canada Posts: 496 Gallery: 0	Ok, tell me how much for the kit via PM, I will be in the market soon for a 4" lift. __________________ 1996 Disco 1 SE7- Stock(Awesome sound system) DD/Range Rover hauler. 1990 RRC SWB Camel Trophy Inspired- ARB, Hella's, Bosch's, AR's 15X8, 32"MTR's,Equipe suspension stuff, Skids, waiting for more...

02-24-2007, 08:14 AM	#23 (permalink)
Nomar Senior Member Join Date: May 2005 Location: in Virginia Posts: 260 Gallery: 0	Personally, I dont think it's good manners to jump into a thread and "sell". I know Steve from RTE and Rob from Draken, both are very good guys and RTE & Equipe both make a nice product... __________________ The mere fact that a flame thrower even exists is proof that sometime, somewhere, somebody said to themselves, "You know, I'd like to set those people over there on fire, but I'm just not close enough to get the job done."

02-24-2007, 08:50 AM	#24 (permalink)
TN-LR3 Ben Join Date: Feb 2006 Location: Nashville,TN Posts: 643 Gallery: 0	nevermind shocks got sold, And I have two axles waiting for me in kentucky just got to head up their with my buddies RAM. i love the look of equipe stuff, but i don't trust the look of that spring dislocating set-up plus i have yalls price list and it ain't cheap __________________ 1997 D-90 #1345- back to stock 2002 Dodge ram 2500CTD- dd/tow rig looking to do 1 ton toyota or rover

02-24-2007, 08:54 AM	#26 (permalink)
TN-LR3 Ben Join Date: Feb 2006 Location: Nashville,TN Posts: 643 Gallery: 0	After wheeling my D90 and seein some trucks with diff. set-ups, I want to bigger than 2 OME springs. They just didn't cut it for me either __________________ 1997 D-90 #1345- back to stock 2002 Dodge ram 2500CTD- dd/tow rig looking to do 1 ton toyota or rover

02-24-2007, 11:21 AM	#27 (permalink)
MuddyRangeRover Where is my Black Son? Join Date: Oct 2006 Location: Aurora/Toronto, Ontario, Canada Posts: 496 Gallery: 0	guys, please, no need to jump on each others throats. I am learning and asking questions. I know "roughly' what set upi i want to go with, but it always helps to know more. Fivespddisco has been very helpful and informative. True, currently his stuff is a little more expensive than I can afford, but he has made many positive suggestions and offered to help w/ me picking his brain, REGARDLESS of whether or not I will buy his stuff, which looks REAL nice. My goal is 4", soft springs, rear/front arms, break lines, 32's, great articulation, and durability. I like to hang with the big boys, so 2" lift ain't gonna cut it. __________________ 1996 Disco 1 SE7- Stock(Awesome sound system) DD/Range Rover hauler. 1990 RRC SWB Camel Trophy Inspired- ARB, Hella's, Bosch's, AR's 15X8, 32"MTR's,Equipe suspension stuff, Skids, waiting for more...

02-25-2007, 08:32 PM	#28 (permalink)
Roverholic Member Join Date: May 2006 Location: Conifer, CO Posts: 47 Gallery: 0	Hey TN, Don’t know if you’ve made the purchase yet but my 2 cents is to go w/ the 10” Fox 2.0’s from Gordon at http://www.inlandrovers.com/. The valving is RIGHT on..butter, butter and more butter. Initially I tried 12” but it wouldn’t work. Buy everything else from RTE and you’re stoked. (Don’t have anything from Equipe, just speaking from what I have on my Classic). Good luck, Paul

02-26-2007, 04:13 PM	#29 (permalink)
TN-LR3 Ben Join Date: Feb 2006 Location: Nashville,TN Posts: 643 Gallery: 0	Thanks roverholic, can you post up some pics of your ride in action maybe? I haven't ordered anything yet but it will Be the full 3' RTE kit, and I might have the funds now to get the bilistiens __________________ 1997 D-90 #1345- back to stock 2002 Dodge ram 2500CTD- dd/tow rig looking to do 1 ton toyota or rover

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode