95 SE Suspension

[RabbiCP]

I had to bypass the suspension, replaced the compressor and that didnt do the trick. Would the next thing to do be pop a new Computer in?

Chas

[LoWBuDget RoVer]

Your guess is good as mine

[shaunmac2002]

Originally Posted by RabbiCP

I had to bypass the suspension, replaced the compressor and that didnt do the trick. Would the next thing to do be pop a new Computer in?

Chas

Have you returned everthing to it's original state? Do you have the EASunlock software yet? Do you have any faults that need resetting? I have gone thru the same thing, email me if you have any questions.

Shaun

[GreenDogRovers]

Hi,


Sounds like you have a bad sensor, if not , more than one.


You should not have to replace anything but the sensors. If the pump stops running, ground the vehicle harness-side EAS pump ground wire (small, prob. green) to the chassis.

The vehicle will fault on the dash if one sensor is bad; but if 2 are bad on the same axle, the car will drop to the bumpstops, and give a fault.

Look to get some new o-rings for your suspension from rover-renovations.com.


-GD