ABS and TC light... help! - Land Rovers Only

aliciacassarino · 03-22-2007, 02:22 PM

i just had my brake pads and rotors replaced by my mechanic on my 97 RR SE, and now the ABS and TC lights are on...

i heard that possibly the sensor just needs to be cleaned off, anyone else experience this or know how to reset the sensor to get the lights to turn off?

thanks so much guys!

-alicia

Rovin4life · 03-22-2007, 05:25 PM

check the connections for the abs sensors. its possible they were disconnected.

but, take a flat head screwdriver and softly tap the rear sensors down.

they should go out, if not get it diagnosed.

03-22-2007, 02:22 PM	#1 (permalink)
aliciacassarino Member Join Date: Feb 2006 Location: boise, id Posts: 13 Gallery: 0	ABS and TC light... help! i just had my brake pads and rotors replaced by my mechanic on my 97 RR SE, and now the ABS and TC lights are on... i heard that possibly the sensor just needs to be cleaned off, anyone else experience this or know how to reset the sensor to get the lights to turn off? thanks so much guys! -alicia

03-22-2007, 05:25 PM	#2 (permalink)
Rovin4life Former NAS LR TECH, Current AUS LR TECH Join Date: Oct 2005 Location: DOWN UNDER Posts: 1,859 Gallery: 0	check the connections for the abs sensors. its possible they were disconnected. but, take a flat head screwdriver and softly tap the rear sensors down. they should go out, if not get it diagnosed. __________________ I work on Rovers. Got a question just ask.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)