![]() |
![]() |
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#1 (permalink) |
|
Member
Join Date: Dec 2006
Location: Maryland
Posts: 10
Gallery:
0
|
Mornin all,
Anybody replace the buckle end for the rear center seat belt?? I have the part, just the buckle with a bolt. the bolt goes through the seat frame from the inside to a nut on the outside. That nut is on their so dern tight I can;t brake it free....makes me wonder if its pressed in. Before I fire up Mr. Impact wrench....any thoughts would be appreciated. Oh Its a 2000 4.6 HSE Don Scott |
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
Former NAS LR TECH, Current AUS LR TECH
Join Date: Oct 2005
Location: DOWN UNDER
Posts: 1,884
Gallery:
0
|
are you certain the nut isnt welded in there.
you may have to take the seat apart to get to the bolt. did one on newer range rover and had to pull the entire seat leather and upholstery apart.
__________________
I work on Rovers. Got a question just ask. |
|
|
|
|
|
#3 (permalink) |
|
Member
Join Date: Dec 2006
Location: Maryland
Posts: 10
Gallery:
0
|
Well...got the nut busted loose.......no where to take the bolt out!!! I think you are right.......hell of a thing to disasseble the whole seat.......Off to the stealership........
|
|
|
|
| Sponsored Links | |
Advertisement |
|