|
|
|
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
 |
|
|
LinkBack | Thread Tools | Display Modes |
05-22-2005, 02:01 PM
|
#1 (permalink) |
|
Member
Join Date: May 2005
Posts: 7
Gallery:
0
|
2001 Disco II Rear-Seat Cupholders
Does anyone have installation instructions or a diagram for the rear-seat, pop-out cupholder assembly? The spring loaded assembly was kid tested and failed. It now requires reassembly. Thanks.
|
|
|
| Sponsored Links | |
Advertisement |
|
|
05-27-2005, 02:13 PM
|
#2 (permalink) |
|
Member
Join Date: May 2005
Posts: 7
Gallery:
0
|
Follow Up to Rear Cup Holders
Problem Solved. The entire assembly must be removed from the arm rest to correctly reinstall the spring mechanism and deployable cup holder assembly. To remove there were two clips on each side that need to be depressed in order to pull the entire assembly out.
|
|
|
|
|
05-27-2005, 02:16 PM
|
#3 (permalink) | |
|
Wheeler
Join Date: Apr 2005
Posts: 1,841
Gallery:
0
|
Quote:
 Kinda like replacing a solenoid on the t-case,,, replacing/reversing the rear tire carrier,,, etc |
|
|
|
|
|
05-27-2005, 08:41 PM
|
#4 (permalink) |
|
Senior Member
Join Date: Jan 2005
Location: Int'l Falls MN
Posts: 178
Gallery:
0
|
is there a way to make sure the same problem won't happen again? Mine is broken right now, but i'm not sure it's worth it to fix it.
__________________
99 disco ii w/ cold climate and SLS. |
|
|
|
| Sponsored Links | |
Advertisement |
|
Linear Mode
