![]() |
![]() |
|
|||||||
| Register | Home | Forum | Active Topics | Gallery | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#4 (permalink) |
|
Super Moderator
Join Date: Aug 2004
Location: Minneapolis, MN
Posts: 827
Gallery:
0
|
Sounds like a blown fuse, just had the same problem myself.
__________________
Land Rover-less. -------------------------------- 2006 Infiniti QX56 - Loaded 2002 Discovery II SE - SOLD! 1999 Audi A6 Avant Quattro Tiptronic - Slammed on RS4 18's 1996 Mariah Talari w/350 Mercruiser and Ron Hill Marine Go-fast parts.(Presently in Dry Storage) |
|
|
|
|
|
#5 (permalink) | |
|
Moderator
![]() Join Date: Aug 2004
Location: Parker, Colorado
Posts: 5,327
Gallery:
0
|
Quote:
If the cold is causing this to happen, then you could be looking at a bad connection, fuse or the switch. This will be one of those interesting ones I am afraid. Mike J. |
|
|
|
|
|
|
#6 (permalink) |
|
Member
Join Date: Sep 2005
Location: Calgary, Alberta, Canada
Posts: 7
Gallery:
0
|
I had a similar problem, my signals were very slow to start blinking when it was cold. Took the signal swithch off, took apart the back of the switch where the plug ins go and cleaned the contacts and replaced the dielectric grease, the contacts looked fine but the grease was dirty around the contact points. Now they work perfectly even in -30C.
|
|
|
|
| Sponsored Links | |
Advertisement |
|