A/C is in Celsius after K&N addition - Land Rovers Only

jshephe2 · 09-06-2005, 06:07 PM

I took many of your advice and took off the neg cable for 15 min to put in the K&N air filter. (We are talking about my 2004 Disco) Now, whenever I turn on the air it is in Celsius not Fahrenheit. Does anyone know of a quick reset or fix for this??

rmuller · 09-06-2005, 06:55 PM

on your HVAC controls, push the bottom left button and bottom right button in at the same time, should switch to F

darkknight1999 · 09-07-2005, 05:08 AM

Mine switches back to celsius about once a week... drives the wife crazy

mcvickoffroad · 09-07-2005, 12:16 PM

The default mode is Celsius so whenever you disconnect the battery it will default when power is restored. There are instruction just like the ones rmuller provided in your owners manual with more detial on operating the rest of the system.
good luck

darkknight1999 · 09-07-2005, 12:20 PM

Actually mine resets itself all by itself... I bought and installed a new battery months ago... but it still does it.

Hailsharky · 09-07-2005, 12:41 PM

You have to hold the far left button down for a few seconds actually (in my 2000 at least) then it will beep, then you hold the far rt button down while still holding the far left button and then you will hear a beep and the display will show farenheit again.

TsiArt · 09-08-2005, 04:22 AM

Can we make this like a sticky . So we don't have to repeat our self . I know when I was looking for this info , I could not find it . But We don't have to repeat our selfs

.

BTW My owners manual is for the Disco I and it has the manual AC controls .

09-06-2005, 06:07 PM	#1 (permalink)
jshephe2 Member Join Date: Aug 2005 Posts: 8 Gallery: 0	A/C is in Celsius after K&N addition I took many of your advice and took off the neg cable for 15 min to put in the K&N air filter. (We are talking about my 2004 Disco) Now, whenever I turn on the air it is in Celsius not Fahrenheit. Does anyone know of a quick reset or fix for this??

09-07-2005, 05:08 AM	#3 (permalink)
darkknight1999 Mod. --- I'm watching you Join Date: May 2005 Location: Linwood, MA Posts: 330 Gallery: 0	Mine switches back to celsius about once a week... drives the wife crazy __________________ -John Some of my favorite quotes: "what you do in life, echo's in eternity..." "death smiles at us all... all a man can do is smile back..." 1999 Discovery II SE-7

09-07-2005, 12:20 PM	#5 (permalink)
darkknight1999 Mod. --- I'm watching you Join Date: May 2005 Location: Linwood, MA Posts: 330 Gallery: 0	Actually mine resets itself all by itself... I bought and installed a new battery months ago... but it still does it. __________________ -John Some of my favorite quotes: "what you do in life, echo's in eternity..." "death smiles at us all... all a man can do is smile back..." 1999 Discovery II SE-7

09-08-2005, 04:22 AM	#7 (permalink)
TsiArt Polish and proud of it. Join Date: May 2005 Location: East Haven, CT Posts: 613 Gallery: 0	Can we make this like a sticky . So we don't have to repeat our self . I know when I was looking for this info , I could not find it . But We don't have to repeat our selfs . BTW My owners manual is for the Disco I and it has the manual AC controls . __________________ I'm a Proud owner of a vehicle that has a turning Radius of 747 Check out our Frappr! Myspace ? It dose not mather who votes, only matters who counts the votes _ Krushchew

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

09-06-2005, 06:55 PM	#2 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,398 Gallery: 0	on your HVAC controls, push the bottom left button and bottom right button in at the same time, should switch to F

09-07-2005, 12:16 PM	#4 (permalink)
mcvickoffroad Member Join Date: Aug 2005 Location: Phoenix, Arizona Posts: 13 Gallery: 0	The default mode is Celsius so whenever you disconnect the battery it will default when power is restored. There are instruction just like the ones rmuller provided in your owners manual with more detial on operating the rest of the system. good luck

09-07-2005, 12:41 PM	#6 (permalink)
Hailsharky Nacho Libre Join Date: May 2005 Location: So Cal "CL" Posts: 590 Gallery: 0	You have to hold the far left button down for a few seconds actually (in my 2000 at least) then it will beep, then you hold the far rt button down while still holding the far left button and then you will hear a beep and the display will show farenheit again.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)