Celsius or Fahrenheit - Land Rovers Only

Panerai_Pete · 08-12-2008, 07:12 PM

Ok, this may seem like an odd question, but here goes. I recently purchased a 2003 DII and I found some interesting things, well one in particular. When I try to set the temperature in the car, it comes up in “Celsius”, not in “Fahrenheit”. (Being that I live in the USA, I would prefer the latter of the two.)

Can someone show me where the instructions to do this are, or at least tell me where I can find the correct information as to how to correct this issue? It is a bit confusing?

Thanks.

Mods, if this is in the wrong section I do apologize.

Rover Kid · 08-12-2008, 07:52 PM

Here you go....

ac temps on ac panel read in the 20's ??? plz help

Disco Mike · 08-13-2008, 07:49 AM

You may want to sit down and read your owners manual so things like this won't catch you in the future.
Mike

jmrivera · 08-13-2008, 08:15 AM

Quote:

Originally Posted by Disco Mike

You may want to sit down and read your owners manual so things like this won't catch you in the future.
Mike

X2!!! Or search this forum or the web.... You do know where the search box is, right?!

Panerai_Pete · 08-13-2008, 11:40 AM

Wow, I didn't expect the sarcasm?

I did search/read my owners manual and had no luck. It is possible that since I bought the DII used that maybe I am missing part of my owners manual?

Maybe I misunderstood the idea of a message board? As I am normally on the "Watch" msg boards and if someone has a question, or if they are having an issue looking for an answer, they post a question and usually get the answer as to where to find the answer, sometimes someone will point out a link as to where you can go ie..(Rover Kid).

This was why I asked the mods if this was in the wrong place, "I do apologize."

BTW, thank you Rover Kid.

bartell · 08-13-2008, 11:58 AM

Quote:

Originally Posted by Panerai_Pete

Wow, I didn't expect the sarcasm?

That can happen here.

You will find downloadable Discovery Manuals at Land Rover Discovery Owners Manuals

You will find the answer to your question on page 84 of the 2003 Manual.

Enjoy your recent purchase.

James

Panerai_Pete · 08-13-2008, 12:11 PM

Just didn't expect that?
Thanks for sharing the info James.

bartell · 08-13-2008, 12:17 PM

Quote:

Originally Posted by Panerai_Pete

Just didn't expect that?

Wait 'til you meet up with P7rangie!

Quote:

Originally Posted by Panerai_Pete

Thanks for sharing the info James.

My pleasure.

J.

brian4d · 08-13-2008, 02:03 PM

Quote:

Originally Posted by Panerai_Pete

Just didn't expect that?
Thanks for sharing the info James.

Panerai:

Don't thank James, thank me!

Shawon · 08-13-2008, 03:48 PM

Yea it should be in the owner's manual. Incase you haven't found it already here's how, it works on my 01 Discovery II SE7 so I'm sure it'll work the same on yours.

Turn on the AC/heater, w/e just press the power button, then you see the air recirculation button (the one with the circular arrows), hold that down and then hold the power button along with it and then like 2 or 3 seconds later you'll hear a beep sound and it should convert to Fahrenheit.

jmrivera · 08-13-2008, 03:54 PM

Quote:

Originally Posted by Panerai_Pete

Wow, I didn't expect the sarcasm?

I did search/read my owners manual and had no luck. It is possible that since I bought the DII used that maybe I am missing part of my owners manual?

Maybe I misunderstood the idea of a message board? As I am normally on the "Watch" msg boards and if someone has a question, or if they are having an issue looking for an answer, they post a question and usually get the answer as to where to find the answer, sometimes someone will point out a link as to where you can go ie..(Rover Kid).

This was why I asked the mods if this was in the wrong place, "I do apologize."

BTW, thank you Rover Kid.

We're just having some fun...

You are right though... The Forum is here for asking questions and getting answers... Sometimes us a-holes like to have fun first...

Feel free to contribute to it anytime because I'm sure I have and I'm going to ask something that can and will get sarcasm...

Which Panerai do you have (I know, wrong board)?

Jonathan

Panerai_Pete · 08-15-2008, 09:44 AM

I know, I should be used to it. It was just a little quick for me, being new and all it was a bit of a shock. But I am ready now... lol

As for as Pannies: PAM00, PAM213, PAM125, PAM063 (Although the 063 is MIA?)
What about you. Send it PM if you like?(If that is possible here?)

Texmexdisco · 08-15-2008, 01:45 PM

According to Page 62 in my 99 Disco II manual it says, STEP 1. Press and hold the air circulation button. STEP 2. At the same time press and hold the on/off button for 3 seconds. STEP 3. A "bleep" will sound to indicate the conversion has taken place. I believe my controls are the same as the 03 discos. Try that it should work.

08-12-2008, 07:12 PM	#1 (permalink)
Panerai_Pete Member Join Date: Jul 2008 Location: Normally, just outside of Detroit, now way outside...ie Shelby Township....Help? Posts: 20 Gallery: 0	Celsius or Fahrenheit Ok, this may seem like an odd question, but here goes. I recently purchased a 2003 DII and I found some interesting things, well one in particular. When I try to set the temperature in the car, it comes up in “Celsius”, not in “Fahrenheit”. (Being that I live in the USA, I would prefer the latter of the two.) Can someone show me where the instructions to do this are, or at least tell me where I can find the correct information as to how to correct this issue? It is a bit confusing? Thanks. Mods, if this is in the wrong section I do apologize.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Celsius to fahrenheit	gj07435	Accessories	4	05-22-2006 09:07 PM
A/C is in Celsius after K&N addition	jshephe2	Discovery Series II	6	09-08-2005 05:22 AM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-12-2008, 07:52 PM	#2 (permalink)
Rover Kid Member Join Date: Oct 2007 Posts: 16 Gallery: 0	Here you go.... ac temps on ac panel read in the 20's ??? plz help

08-13-2008, 07:49 AM	#3 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,765 Gallery: 0	You may want to sit down and read your owners manual so things like this won't catch you in the future. Mike

08-13-2008, 11:40 AM	#5 (permalink)
Panerai_Pete Member Join Date: Jul 2008 Location: Normally, just outside of Detroit, now way outside...ie Shelby Township....Help? Posts: 20 Gallery: 0	Wow, I didn't expect the sarcasm? I did search/read my owners manual and had no luck. It is possible that since I bought the DII used that maybe I am missing part of my owners manual? Maybe I misunderstood the idea of a message board? As I am normally on the "Watch" msg boards and if someone has a question, or if they are having an issue looking for an answer, they post a question and usually get the answer as to where to find the answer, sometimes someone will point out a link as to where you can go ie..(Rover Kid). This was why I asked the mods if this was in the wrong place, "I do apologize." BTW, thank you Rover Kid.

08-13-2008, 12:11 PM	#7 (permalink)
Panerai_Pete Member Join Date: Jul 2008 Location: Normally, just outside of Detroit, now way outside...ie Shelby Township....Help? Posts: 20 Gallery: 0	Just didn't expect that? Thanks for sharing the info James.

08-13-2008, 03:48 PM	#10 (permalink)
Shawon Member Join Date: Aug 2008 Posts: 23 Gallery: 0	Yea it should be in the owner's manual. Incase you haven't found it already here's how, it works on my 01 Discovery II SE7 so I'm sure it'll work the same on yours. Turn on the AC/heater, w/e just press the power button, then you see the air recirculation button (the one with the circular arrows), hold that down and then hold the power button along with it and then like 2 or 3 seconds later you'll hear a beep sound and it should convert to Fahrenheit.

08-15-2008, 09:44 AM	#12 (permalink)
Panerai_Pete Member Join Date: Jul 2008 Location: Normally, just outside of Detroit, now way outside...ie Shelby Township....Help? Posts: 20 Gallery: 0	I know, I should be used to it. It was just a little quick for me, being new and all it was a bit of a shock. But I am ready now... lol As for as Pannies: PAM00, PAM213, PAM125, PAM063 (Although the 063 is MIA?) What about you. Send it PM if you like?(If that is possible here?)

08-15-2008, 01:45 PM	#13 (permalink)
Texmexdisco Member Join Date: Jun 2008 Posts: 35 Gallery: 0	According to Page 62 in my 99 Disco II manual it says, STEP 1. Press and hold the air circulation button. STEP 2. At the same time press and hold the on/off button for 3 seconds. STEP 3. A "bleep" will sound to indicate the conversion has taken place. I believe my controls are the same as the 03 discos. Try that it should work.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)