changed the battery - Land Rovers Only

sabrashelby · 08-30-2005, 05:34 PM

I just changed the battery and now my AC and radio don't work right. the AC says 22 degrees. i know that ain't right and my radio say Code. What's up with that and how do i fix it??????

rmuller · 08-30-2005, 05:45 PM

A/C is in centrigrade (sp) ... You're going to have to learn how to convert to F.... just kiddin... I'm not looking at the dash right now, but I believe on the AC controls, the bottom row of buttons (where there are a few of them), hold the far left one and far right one in and it should flash F and C, and stop at F..

As for the CODE.. its the antitheft device, you should have a code within your booklet from the dealer, and instructions on how to enter it from there.. if you dont have the code, you'll have to call the dealer and give them your VIN.

javelinadave · 08-30-2005, 07:54 PM

To convert all you have to do is.......
1) Double the temp.
2) Subtract 10%
3) Add 32 and you have degrees fahrenheit

Or you can do that button thingy......

08-30-2005, 05:34 PM	#1 (permalink)
sabrashelby Member Join Date: Aug 2005 Posts: 1 Gallery: 0	changed the battery I just changed the battery and now my AC and radio don't work right. the AC says 22 degrees. i know that ain't right and my radio say Code. What's up with that and how do i fix it??????

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

08-30-2005, 05:45 PM	#2 (permalink)
rmuller Moderator Join Date: Feb 2005 Location: Northern NJ Posts: 2,359 Gallery: 0	A/C is in centrigrade (sp) ... You're going to have to learn how to convert to F.... just kiddin... I'm not looking at the dash right now, but I believe on the AC controls, the bottom row of buttons (where there are a few of them), hold the far left one and far right one in and it should flash F and C, and stop at F.. As for the CODE.. its the antitheft device, you should have a code within your booklet from the dealer, and instructions on how to enter it from there.. if you dont have the code, you'll have to call the dealer and give them your VIN.

08-30-2005, 07:54 PM	#3 (permalink)
javelinadave Member Join Date: Aug 2005 Location: Scottsdale, AZ, USA Posts: 5 Gallery: 0	To convert all you have to do is....... 1) Double the temp. 2) Subtract 10% 3) Add 32 and you have degrees fahrenheit Or you can do that button thingy......

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)