Dam-it...headgaskets.... - Land Rovers Only

6cuda6 · 01-31-2007, 11:28 AM

Anyone know of a good source for headgaskets???? It doesn't make sense to put the same old cr@p back on the truck if there is better ones out there....

thanks, Dean

Muddy Oval · 01-31-2007, 11:47 AM

DAP has the composite head gaskets are $17.50ea. Best way to go would be a head refit kit which includes all new bolts and the intake valley pan, end seals etc. Any Rover parts place should have the stuff.

Rovin4life · 02-01-2007, 04:01 AM

Quote:

Originally Posted by 6cuda6

Anyone know of a good source for headgaskets???? It doesn't make sense to put the same old cr@p back on the truck if there is better ones out there....

thanks, Dean

rover making improvements on parts

that is a funny joke right there.

Be glad you didnt buy a freelander.

same crappy parts as an 05 as on an 02

Disco Mike · 02-01-2007, 05:21 AM

Dean,
Go with what Steve mentioned, also make sure the heads are inspected and resurface to make a good surface for the new gaskets and seal them well.
Mike

6cuda6 · 02-01-2007, 07:45 AM

Thanks guy's will look into that DAP gasket set...it's an external leak at this point, left front of the left head.....small at this point but it is starting to get blown back against the firewall.....

01-31-2007, 11:28 AM	#1 (permalink)
6cuda6 Senior Member Join Date: Apr 2006 Posts: 299 Gallery: 0	Dam-it...headgaskets.... Anyone know of a good source for headgaskets???? It doesn't make sense to put the same old cr@p back on the truck if there is better ones out there.... thanks, Dean

01-31-2007, 11:47 AM	#2 (permalink)
Muddy Oval Otherwise known as STEVE Join Date: Oct 2005 Location: Vermont Posts: 1,968 Gallery: 0	DAP has the composite head gaskets are $17.50ea. Best way to go would be a head refit kit which includes all new bolts and the intake valley pan, end seals etc. Any Rover parts place should have the stuff. __________________ 2002 Freelander 2000 DII w/CDL 1967 SIIA 109SW Former Rovers 2004 Modded "S" Disco, R.I.P. 2004 G4 Disco 2002 Modded Freelander 1995 Modded Disco 1994 D-90 #8 1993 NAS D110 1990 Range Rover County 1973 SIII 88 1972 Range Rover 2 door

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

02-01-2007, 05:21 AM	#4 (permalink)
Disco Mike Moderator Join Date: Aug 2004 Location: Parker, Colorado Posts: 5,321 Gallery: 0	Dean, Go with what Steve mentioned, also make sure the heads are inspected and resurface to make a good surface for the new gaskets and seal them well. Mike

02-01-2007, 07:45 AM	#5 (permalink)
6cuda6 Senior Member Join Date: Apr 2006 Posts: 299 Gallery: 0	Thanks guy's will look into that DAP gasket set...it's an external leak at this point, left front of the left head.....small at this point but it is starting to get blown back against the firewall.....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)