gear change problen - Land Rovers Only

wayneus1 · 01-23-2008, 11:23 AM

hi all.when i change gear from 3rd to 2nd i get a whinning noise and you can feel it on the gear stick.its only when it is moving,if im stopped and change gear its ok plus its ok from 1st to 2nd,its just 3rd to 2nd.it does go in ok just get a whinning noise as you go into 2nd.any ideas thanks

XtremeMarine · 01-23-2008, 03:10 PM

That's the noise I got right before my internal clutch discs all blew in the tranny. First it was just one gear change, then two. Then all three. Bring it to someone who can read codes, and see if the tranny is throwing off any codes. I brought mine to AAmco, and they scanned it right there. Actually had a clutch code for the autobox.

antichrist · 01-25-2008, 06:27 AM

I had that noise in my Disco as the bakelite sleeve for the release bearing was spinning and shredding itself.

01-23-2008, 11:23 AM	#1 (permalink)
wayneus1 Member Join Date: Jan 2008 Posts: 24 Gallery: 0	gear change problen hi all.when i change gear from 3rd to 2nd i get a whinning noise and you can feel it on the gear stick.its only when it is moving,if im stopped and change gear its ok plus its ok from 1st to 2nd,its just 3rd to 2nd.it does go in ok just get a whinning noise as you go into 2nd.any ideas thanks

01-23-2008, 03:10 PM	#2 (permalink)
XtremeMarine Senior Member Join Date: May 2007 Posts: 1,590 Gallery: 0	That's the noise I got right before my internal clutch discs all blew in the tranny. First it was just one gear change, then two. Then all three. Bring it to someone who can read codes, and see if the tranny is throwing off any codes. I brought mine to AAmco, and they scanned it right there. Actually had a clutch code for the autobox. __________________ "In certain places, at certain hours, gazing at the sea is dangerous. It is what looking at a woman sometimes is." - Victor Hugo Originally Posted by Elemental Some guys play hard to get, I play hard to want.

01-25-2008, 06:27 AM	#3 (permalink)
antichrist Senior Member Join Date: Aug 2004 Location: near Altanta Posts: 544 Gallery: 0	I had that noise in my Disco as the bakelite sleeve for the release bearing was spinning and shredding itself. __________________ Tom Rowe Atlanta, GA Four wheel drive allows you to get stuck in places even more inaccessible. 62 88 reg 67 NADA x2 74 Air Portable - The Antichrist (tag 6A666) 95 D1 - R380 95 D90 - R380

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gear change and diesel problem	wayneus1	Discovery Series II	4	01-09-2008 06:09 AM
gear change thumping noise 300tdi transmission	andrew dunn	Defender	3	11-10-2007 09:11 AM
Comments/Suggestions [Post Here]	rmuller	Tech & DIY	29	04-20-2007 07:33 PM
NYTimes: Is 8 Enough? Transmissions Meet the Need for Speeds	Adam in NYC USA	General Land Rover Discussion	6	09-16-2006 09:21 AM
Notchy gear change from 1st to 2nd gear	mcguckiana	Discovery Series II	1	11-02-2005 02:02 PM

Remove Advertisements Sponsored Links
Land Rovers Only - Land Rover Forum Advertisement

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)